Hi guys, I just purchased the DSTV Explora decoder today and I already have the DSTV HD PVR decoder. Is it possible to do a self install at home?

I have 2 cables coming into the home from the dish and both of them go into my splitter. One goes into the 13v port and the other into the 18v port. Then there are about 4 cables connected to an REC1,2,3,4 and then those cables go from the REC ports to my HD PVR decoder. What I have tried was to connect the 13v port cable directly to the Explora 13v unicable port. And then just connected the RF output cable to the Explora. But when turning on the Explora at the setup screen I keep getting a no signal detected error. Also I haven't inserted my smartcard from the HD PVR in the Explora yet.

Install your own DSTV. Place the main dish antenna assembly onto the top of the mast, with the center of the mast clamp on the back dish assembly aligning withthe top of the mast pole. Tighten the two screws on the mast clamp to hold the main dish assembly securely to the mast. Plug the RG-6 coaxial cable into the “Cable” (or equivalent).

At the moment you have the following options: (1) Get in an accredited installer to do the job for you. ----- BUT you need to make sure they actually DO the job properly. (2) DIY- for this you will need lots of patience, and a simple Satfinder similar to those used by the camping/caravan fraternity (a) Replace the antenna --- For optimal reception of HD channels, the minimum antenna size is 85 - 90 cm.

(b) The simple switch is not really available anymore. If you can get one make sure it is version 5-2, NOT 5-1. (c) DSTV is starting to implement services on the new satellite, which ultimately will require hi-band reception. This means the minimum LNB required is a Quad/Quattro LNB combined with a Explora switch. The replacement switch available is a 24-1Z switch which costs the same as a SLNB. (d) The new SLNB allows for 3 Explora decoders to be connected plus one legacy single view decoder.

This is MCs recommended install. (e) Alternatively, you could use a Unicable/SATCR LNB but this will limit what you can do in the future.

Neet physics notes. Dc Pandey Physics For Neet Pdf.pdf - Indiapdf.com Free download PDF files on the internet. Dc Pandey physics mechanics part 2 PDF is the best book ever for a Serious IIT-JEE (Main, Advance) & Medical Student.It is the best book for you if you are preparing for JEE Main or Advance Seriously. Download: Dc Pandey Physics Pdf.pdf. Similar searches: D C Pandey Physics Pdf Dc Pandey Physics Pdf Understanding Physics Dc Pandey Dc Pandey Optics And Modern Physics Pdf Dc Pandey Dc Pandey Pdf D C Pandey For Neet Dc Pandey Neet Dc Pandey Electrostatics Pdf Dc Pandey For Neet Dc Pandey Optics Himanshu Pandey Financial Management By I.m. Pandey Dc Pandey Mechanics Part 1 Dc Pandey Vol 1 Dc.

The components are available direct from MC, or Space-TV or Ellies. Make sure whatever you get states that it is MC approved for use with an Explora decoder. Note MC no longer sell Explora decoders with switches or SLNBs -- you have to purchase these separately. At the moment you have the following options: (1) Get in an accredited installer to do the job for you. ----- BUT you need to make sure they actually DO the job properly.

(2) DIY- for this you will need lots of patience, and a simple Satfinder similar to those used by the camping/caravan fraternity (a) Replace the antenna --- For optimal reception of HD channels, the minimum antenna size is 85 - 90 cm. (b) The simple switch is not really available anymore. If you can get one make sure it is version 5-2, NOT 5-1. (c) DSTV is starting to implement services on the new satellite, which ultimately will require hi-band reception. This means the minimum LNB required is a Quad/Quattro LNB combined with a Explora switch. The replacement switch available is a 24-1Z switch which costs the same as a SLNB.